low voltage

Hotline

Discontinued MTL3041 REPEATER POWER SUPPLY 4/20mA for 2-wire transmitters.

description:MTL3000 series MTL3041 REPEATER POWER SUPPLY 4/20mA for 2-wire transmitters has been discontinued....
BASIC INFO
MTL3000 series MTL3041 REPEATER POWER SUPPLY 4/20mA for 2-wire transmitters has been discontinued.
MTL3000 Series interface units offered a compact and easy-to-use means for communicating safely with process measuring, indicating, actuating and local control equipment in hazardous areas. The comprehensive range of models included analogue, switch and serial-digital signals in both directions, amplifying or otherwise conditioning them as required and at the same time providing world wide certified explosion protection for equipment and wiring in all zones and all explosive atmospheres. It also provided an alternative to the shunt-diode safety barrier where isolation was essential or preferred or a high-integrity earth was not readily available.
 
The MTL5500 Series are the recommended replacements for this series.

MTL3041 REPEATER POWER SUPPLY, 4/20mA for 2-wire transmitters.
The MTL3041 provides a fully-floating dc supply for energising a 2- Load wire, 4/20mA transmitter in a hazardous area, and repeats the current accurately in another floating circuit to drive a load in the safe area. The 17.5V output (at 20mA) is more than sufficient for all normal transmitter loops, and the fact that it floats allows the field cables to be earthed, either intentionally or in error. The isolation of the safe-area circuit from the 24V dc supply allows systems to be wired without difficulty so as to eliminate measurement errors due to voltage drops in shared cables, and solves the problem of feeding control computers connected independently to earth as is sometimes demanded by their makers. The transformer-coupled circuit of the
MTL3041 chops the 4/20mA current directly, eliminating the need for any ‘high-stability’ resistors and ensuring extremely high long-term as well as short-term stability. For applications involving ‘smart’transmitters, use the MTL3046B.
 
MTL3000 series
Product CodeDescription
MTL3011   Switch/proximity detector relay - volt-free contacts
MTL3012   Switch/proximity detector relay - solid state 
MTL3013   Switch/proximity detector relay - 2-channel 
MTL3014   Switch/proximity detector relay - dual outputs
MTL3021_22  Solenoid/alarm driver ~ IIC loop powered
MTL3041   Repeater power supply - 4/20mA for 2-wire transmitters 
MTL3042   DC isolator - 4/20mA loop powered for I/P converters
MTL3043   DC isolator - 1/40mA for fire and smoke detctors
MTL3045   Isolating driver - 4/20mA for I/P converters 
MTL3046B  Repeater power supply - for ‘smart’ transmitters
MTL3052   Digital isolator - for signals up to 10kHz
MTL3054   Communications isolator/ repeater
MTL3058_59  Serial data interface ~ RS232 general purpose
MTL3071   Temperature converter ~ THC or emf input
MTL3072   Temperature converter ~ 3-wire RTD input
MTL3073   Temperature converter ~ THC or RTD input
MTL3081   Millivolt isolator - for low-level inputs
MTL3099   Dummy isolator - for terminating and isolating unused cores 
MTL3992   High stability power supply
 

Pre:MTL3000 series MTL3022 – IIB, loop powered has been discontined for sale. Next:MTL3042 DC ISOLATOR 4/20mA loop-powered for I/P converters has been discontinued.